GeoGro's Filament Geotextile

GeoGro's Polyester filament geotextile is made directly by spinning and needle-punching and consolidating polyester filaments, it's made by forming and consolidating polyester filaments, the fibers are arranged in a 3D structure.Polyester filament non-woven geotextile has excellent heat resistance and light resistance, even if it is exposed to an environment of nearly 20 degrees for a short time, its performance is almost unchanged. After a large number of tests and practices, the polyester filament non-woven geotextile has long-term corrosion resistance to various natural soils, moisture and microorganisms.

GeoGro's PET geotextile performance

Physical properties: Physical properties: Pet geotextiles generally have a higher weight, a larger thickness, and good uniformity.
Mechanical behavior: Has high dry and wet tensile breaking strength and seam joints High strength, elastic modulus, impact resistance, creep resistance, tear resistance, etc.
Hydraulic performance: For projects with filtration and anti-filtration performance, polyester spunbond needle-punched geotextiles are required to have a higher permeability coefficient; but for anti-seepage projects, polyester spunbond needle-punched geotextiles are required to have smaller permeability coefficient.
Durability: The polyester spunbond needle-punched geotextile must have weather resistance, chemical corrosion resistance, biological resistance and physical damage resistance.

GeoGro's Pet Geotextile function :
1)Filter layer
The role of the filter layer mainly refers to the two aspects of filtration and reverse filtration. The pet geotextile produced by GeoGro can make liquid (mainly water) pass through the structure smoothly, while ensuring that the soil particles as the skeleton do not lose with the water flow, but at the same time Allow water to flow through soil particles and sand to ensure the stability of the soil structure.
2)Drainage
The GeoGro's pet geotextile has excellent water conductivity and can form a drainage channel in the soil structure to discharge excess liquid and gas in the structure.
3)Isolation
GeoGro's pet geotextile also has the function of separating two different materials without mixing. Prevent the penetration or mixing between the two materials, maintain the overall structure and functional material system, and improve the load-bearing capacity of the structure.
4)Reinforcement
The GeoGro's geotextile buried in the soil can disperse the stress in all directions inside the soil, improve the separation modulus of the soil, and transmit tensile stress, thereby limiting the possible displacement of the soil in all directions and increasing the polyester The friction between the spunbond needle-punched geotextile and other materials and between the soil medium can improve the stability of the soil and related buildings.
5) Protective effect
As a protective material, GeoGro's geotextiles can effectively diffuse, transfer or decompose stress, and prevent soil structures from being damaged by external forces.

Technical Specifications

Index Properties Test Method Unit GGT100 GGT200 GGT300 GGT600 Color - - White or Black White or Black White or Black White or Black Ultimate Tensile Strength, MD ASTM D4595 kN/m 7 14 19 41 Ultimate Tensile Strength, TD ASTM D4595 kN/m 6 12 17 38 Tensile Elongation ASTM D4595 % 45 50 50 60 Grab Tensile Strength, MD ASTM D4632 N 400 850 1250 2500 Grab Tensile Strength, TD ASTM D4632 N 350 700 1100 2150 Grab Elongation ASTM D4632 % 45 50 50 60 Trapezoid Tear Strength, MD ASTM D4533 N 160 350 490 920 Trapezoid Tear Strength, TD ASTM D4533 N 140 330 450 900 CBR Puncture Strength ASTM D6241 N 1000 2300 3200 6900 Apparent Opening Size O90 ASTM D4751 mm 0.12 0.11 0.09 0.08 Water Flow Q100 ASTM D4491 L/m2/s 250 220 185 80 U.V. Resistance ASTM D4355 % @ 500h 70 70 70 70 Weight ASTM D5261 g/m2 100 200 300 600 Thickness ASTM D5199 mm 1.2 2.3 3.2 4.8 Roll Width - m 6 6 6 6 Roll Length - m 300 150 100 50

GEOGRO Geotextile Package

GEOGRO Geotextile Certificate

GeoGro owns 23 production lines for HDPE pipe &fittings, 5 HDPE Geomembrane production lines now, also has established a national-standard laboratory for in-house quality control and built a strict quality control system in all aspects from raw materials testing and production processes to final product quality testing.Not only is stringent internal quality control carried out at GeoGro, but regular testing and analyzing of our product performance is implemented by authoritative testing organizations in Europe and theUnited States. The management system is certified by ISO9001 and GeoGro’s products have passed the CE certification authorized by BTTG.